The metal card clothing:

20 series of form a complete set:

SXF - 27 AC2030 x 01550 teeth close high speed high production carding league in 860

SXF - 47 AC2035 tooth close 860 x 01550 high speed high production carding

AC2035 SXF - 77 x 01745 teeth close 868 high speed high production carding

SXF - 30 AD4050J tooth close 341 x 02190 high speed high production carding

SXF - 42 AD4030H x 02190 teeth close high speed high production carding league in 341

SXF - 40 AD4030H x 02175 teeth close high speed high production carding league in 409

Design features:

A. to cylinder wire short, shallow, thin, dense, small, pointed to design, the development characteristic of total height can reduce clothing in carding load, increase carding degree; Tooth depth is beneficial to reduce the fiber overload, make fiber tip; Base thin for the fiber bundle is divided into single fiber, reducing neps, at the same time improve the tooth density increased grip the carding ability of the fibers; Working Angle increase the grip of the fiber is small, solve due to the high speed, centrifugal force caused by fiber slippage, reduce the floating fiber, improve carding effect; Addendum area reducing improving sharpness.

SXF - 47 working Angle is smaller than SXF - 27 and 5 °, increase the grip of the fibers.

And SXF SXF - 77-47, compared to the working Angle, but its base thin increased horizontal density, is conducive to the carding into single fiber; The pitch is 1. 7 mm, longitudinal is thinning. Reduced the longitudinal repetition, reduce the damage of the fibers, avoid linter.

B.S XF - 30 AD4050J (arc Angle changed doffer)

Tip of the tooth profile is unique, the tooth use chick, lower using common doffer shape, the upper working Angle of 40 °, anterior horn 50 °, the lower working Angle 60 °, Angle of 30 ° before; Can replace AD5030 doffer card clothing with AC20 series, solve lapped difficulties; Combination of tooth profile, the upper Angle of small work with doffer transfer rate, big pitch, a big gap to solve the problem of the drainage of the high-speed airflow. (the appended drawings)

SXF - 42 AD4030H x 02190

Using parabola principle design and manufacture of arc doffer, before the second tooth back are parabola formed smooth arc line, forming a, avoid the original formed a mix of circular intersection of transfer. The working Angle as a variable, when the tooth is 60 °, and the teeth of arc tangent, before working Angle from 55 ° to 90 °, eventually becoming an obtuse Angle. In carding, reduce the amount of overload the fiber, and fiber increases with the trend of formation to fall off shift.

40 AD4030H SXF - by 02175

Ditto design characteristics, the main difference is the base thickness from 0.9 mm to 0.9 mm, increase of transverse density, in the transfer of the carding and reduce nep. (the appended drawings)

25 series of form a complete set:

SXF AC2525 x 01550-11 teeth close 860 lower, middle carding machine

SXF to 37 AC2530 tooth close 993 x 01350 high speed high production carding machine

43 AC2525 SXF - 01560 x 01560 teeth close lower middle carding machine

SXF - 45 AC2530 x 01560 teeth close high-yield high-speed carding machine in 717

51 AC2525 SXF - 01860 x 01860 teeth close lower middle carding machine

SXF - 57 AC2520 tooth close 672 x 01660 stripper carding machine, chemical fiber

SXF - 59 AC2525 x 01360 teeth close 827 lower middle carding machine, chemical fiber

SXF - 7 AC2525 x 01360 teeth close 827 lower middle carding machine, chemical fiber

SXF - 8 AD4030 tooth close 448 x 01880 middle or card

SXF - 12 AD4032 x 02075 teeth close high production carding machine in 430

SXF - 6 AD4030 tooth close 398 x 01890 gm lower-middle carding machine

SXF - 24 AD4030 tooth close 398 x 01890 gm lower-middle carding machine

Design features:

(1) cylinder:

A.S XF - 37 and SXF - 45 work with 60 ° Angle, in order to meet the needs of the 25 clothing carding machine at high speed. SXF to 37 with 0.5 mm and 1.3 mm thick at the base of the pitch of the tooth reached nearly 1000, the per unit area the carding effect increased.

B.S XF - 43 and SXF - 51, the main difference is that a pitch that is greater than 1.3 mm, respectively 1.5 and 1.8 mm, in order to reduce the longitudinal repeating carding, fiber alternation of improving current, reducing neps.

C.s. XF - 7 and SXF to 59, the main difference is that a tooth deep one is 0.6 mm, one is 0.4 mm, which nearly 20 series cylinder wire tooth depth. Make the fiber used in tooth movement, reduce the overload, the transfer and the carding.

D.S XF - 57, working Angle is 70 °, main spun midfibre and regenerated fiber, such as working Angle is large, in favor of the transfer of chemical fiber, avoid paste car, fiber, etc.

(2) the doffer:

A.S XF - 6 and thick SXF - 8 the difference between the base, one is 0.8 mm, one is 0.9 mm, teeth close differ,0.8 50 mm thick at the base of relatively thin cylinder is more suitable for the base, improve carding effect.

B.S XF - 12 working Angle for 58 °, is relatively small, in order to grasp the fibers transfer, 2.0 mm pitch at the same time, increased clearance capacity, good drainage of the airflow, the base of the 0.75 mm thick, transverse density, increase the carding transfer. Is the middle doffer carding machine with ideal. The tooth profile for the linear tooth shape.

C.s. XF - 24 for double linear convex back tooth shape, the main solution to pressure resistance, rolling resistance is strong. (the appended drawings)